Water Filter Sizing
We can suggest the water filter size that would best suit your water system.
Part
| Flow (gpm)
| Max Press (psi)
| Max Temp. (°F)
| Inlet/ Outlet Connct.
| Overall Length
| Cartridge
| Master Ctn
|
1PC
| 1 to 2
| 125 | 100
| 3/4
| 12-3/8
| 1C9 | 6
|
1PC-B | 1 to 2
| 125 | 100 | 3/4 | 12-3/8 | 1C9 | 6 |
1PC-B1 | 1 to 2
| 125 | 100 | 1 | 12-3/8 | 1C9 | 6 |
2PC | 2 to 4
| 125 | 100 | 3/4 | 22-1/2 | 1C9 (2)
| 1 |
2PC-B
| 2 to 4
| 125 | 100 | 3/4 | 22-1/2 | 1C9 (2)
| 1 |
2PC-B1 | 2 to 4
| 125 | 100 | 1 | 22-1/2 | 1C9 (2)
| 1 |
Industrial-strength plastic filters with clear bowls, in single and double cartridge lengths (double cartridge type for higher flow rate and twice the taste & odor- removing capacity). "B" models feature a pressure-release button for easy cartridge changing. Service Wrench included.
Replacement Water Filters and Parts:  | Taste/ Odor/ Sediment Cartridge 5 micron, 9 ¾" Heavy Duty
- Model: 1ACHD-30
- Symptoms: "Swimming Pool" taste and odor; rotten egg odor
- Use the 1ACHD-30 5 micron, "Heavy Duty" filter cartridge for removal of tastes, odors and sediment in cold water. This cartridge uses a pulverized, activated carbon blend of synthetic fibers and fits all Campbell and most competitors 10" filter housings. Cartridges are manufactured from FDA listed materials and are NSF approved.
|
| Taste & Odor Filter Cartridge 2 Micron, 9 ¾", 2 pack
- Model:1LC-24
- Symptoms: "Swimming Pool" taste and odor; rotten egg odor
- Use the 1LC-24 filter cartridge for removal of tastes & odors in cold water. This cartridge uses a pulverized, activated carbon and fits all Campbell and most competitors 10" filter housings. Cartridges are manufactured from FDA listed materials and are NSF approved.
|
 | Taste & Odor Filter Cartridge 2 Micron, 9 ¾", 2 pack
- Model: 1C9-12
- Symptoms: "Swimming Pool" taste and odor, rotten egg odor, cloudiness, rust or specks; dirt on bottom of drinking glass or faucet aerator; Stains on fixtures; Low pressure caused by sediment build-up.
- Use the 1C9-12 filter cartridge for removal of tastes, odors and sediment in cold water. This is the same cartridge included in all Campbell Taste & Odor filter systems. The Diamond-Wound™ polypropylene cartridge uses activated carbon and fits all Campbell and most competitors 10" filter housings. Cartridges are manufactured from FDA listed materials and are NSF approved.
|
Water Filtration Chart
MICRONS*
| PARTICLES FILTERED
| PROTECTION
|
1
| Cryptosporidium and Giardia Cysts
| from water-borne parasites
|
5 | Fine sediment and suspended clay
| for icemakers
|
20-30 | Invisible** scale, rust, dirt, and sand
| for water heaters & washing machines
|
50+ | Visible scale, rust, dirt, and sand
| for showerheads, faucets, pipes
|
* One micron is .00001 meter or .0025 inch
Top Areas / Zip Codes we service:
Ellicott City, MD: 21042, 21043
Columbia, MD: 21044, 21045, 21046
Clarksville, MD: 21029
Sykesville, MD: 21784
Dayton, MD: 21036
Fulton, MD: 20759
Olney, MD: 20830